Download  Print this page

Before You Start - Canon 10x30 IS II Instructions Manual

Hide thumbs

Advertisement

Before You Start

When handling batteries, please carefully read "
z
the batteries)" and "
on page 4 of this manual.
Please use two new batteries of the same brand. Also, always replace
z
both batteries at the same time.
Since the shapes of battery contacts for AA-size batteries other than alkaline batteries*
z
is not standardized, use of certain brand batteries may result in contact failure.
* An alkaline battery is a primary cell capable of electrical discharge only and designed to
be used only once and discarded.
Battery Life (Continuous Use)
Size-AA alkaline batteries*
* Alkaline battery usage times can vary greatly depending on the brand.
AA-size nickel metal hydride rechargeable batteries (Ni-MH) can also be used.
z
Rechargeable batteries are batteries which can be charged and reused
z
many times.
ENG-6
(The 12x36 IS III is shown in the illustrations.)
1
Attach the strap.
Make sure there is no slack at
z
the clasp, and that the strap
does not loosen at the clasp
when you pull it.
2
Insert the battery.
Open the battery chamber
z
cover, and insert the battery in
the correct + and – orientation
shown in the battery chamber.
3
Check that the lamp lights.
Press the Image Stabilizer
z
button and check that the lamp
lights.
Caution (regarding the batteries)" which are found
(Based on Canon's testing conditions)
25°C / 77°F
Approx. 9 hours
Warning (regarding
–10°C / 14°F
Approx. 1 hour

Advertisement

Table of Contents
loading

  Also See for Canon 10x30 IS II

  Related Manuals for Canon 10x30 IS II

This manual is also suitable for:

12x36 is iii