Launching and exiting iFIST
Launching iFIST (applicable to H3C UniServer
R4900/4700/2900/2700 G3)
To launch iFIST, use either of the following methods:
•
Method 1:
a. Boot the server.
b. On the POST screen shown in
Figure 1 Launching iFIST from the POST screen
•
Method 2:
a. Boot the server.
b. On the POST screen shown in
The BIOS setup screen opens.
c. Click the Save&Exit menu, as shown in
d. Select Launch iFIST, and then press Enter.
Figure
1, press F10 to launch iFIST.
Figure
1, press ESC or DEL.
Figure 2
3
Need help?
Do you have a question about the UniServer R4900 G3 and is the answer not in the manual?