Download
Share
Print this page
Graco 24P930 Installation Manual
  1. Manuals
  2. Brands
  3. Graco Manuals
  4. Paint Sprayer
  5. 24P930
  6. Installation manual
Graco 24P930 Installation Manual

Graco 24P930 Installation Manual

Linelazer iv 250sps 3rd or 4th gun kit
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Installation
LineLazer lV 250
3rd or 4th Gun Kit 24P930
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions and warnings in this
manual and in 3A2090 or 3A2593. Save all
instructions.
3300 psi (22.7 MPa, 227.5 bar) Maximum Working Pressure
SPS
ti21710a
332561D
EN

Advertisement

loading
Need help?

Need help?

Do you have a question about the 24P930 and is the answer not in the manual?

Questions and answers

Related Manuals for Graco 24P930

Summary of Contents for Graco 24P930

  • Page 1 Installation LineLazer lV 250 332561D 3rd or 4th Gun Kit 24P930 IMPORTANT SAFETY INSTRUCTIONS Read all instructions and warnings in this manual and in 3A2090 or 3A2593. Save all instructions. 3300 psi (22.7 MPa, 227.5 bar) Maximum Working Pressure ti21710a...

  • Page 2: Pressure Relief Procedure

    Pressure Relief Procedure Pressure Relief Procedure Follow the Pressure Relief Procedure whenever 5. Engage gun trigger safety. you see this symbol. This equipment stays pressurized until pressure is manually relieved. To help prevent serious injury from pressurized fluid, such as skin injection, ti3324a splashing fluid and moving parts, follow the Pressure Relief Procedure when you stop spraying and before...

  • Page 3: Installation

    Installation Installation 1. Perform Pressure Relief Procedure, page 2. 2. Install extension clamp support bracket (9). ti21721a 7. Install exposed cable through cable bracket slot. ti21734a 3. Pull out existing gun arm support bracket. ti18997a 8. Insert plastic cable retainer into cable bracket hole. ti21719a 4.
  • Page 4 Installation 11. Route cable end loop through rectangular hole in 14. Align guns. bracket and insert plastic cable retainer into the slot- ted hole on the actuator bracket. Install cable end onto actuator rod and install clip. ti21711a ti21713a NOTE: Each gun actuator is capable of operating two cables.
  • Page 5 Parts Parts 12, 13 ti27327a Ref. Part Description Ref. Part Description 222385 TAG, warning 16M671 CABLE, gun, solenoid STRAP, tie 24M638 BAR, gun holder, LL IV 250 SPS 196177 ADAPTER, nipple 126111 RETAINER, clip, external, 8mm 24U759 HOLDER, 3rd gun (opposite side) 287566 KIT, clamp 24N170 BRACKET, mount, pointer 124490 FITTING, tee, street...
  • Page 6 Original instructions. This manual contains English. MM 332561 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001. www.graco.com...