Download Print this page
Triple S POWER SPOTTER 4 Operating & Maintenance Instructions

Triple S POWER SPOTTER 4 Operating & Maintenance Instructions

Portable extractor/spotter

Advertisement

Quick Links

POWER SPOTTER 4
Portable Extractor/Spotter
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell all
operators to read the book. If you do not follow the instruc-
tions, you can cause an injury or damage equipment, furni-
ture or buildings.
For new books write to:
Triple S
2 Executive Park Drive
Billerica, MA 01862
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately with
the delivering carrier.
OPERATING & MAINTENANCE
INSTRUCTIONS
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Triple S
reserves the right to make changes or improvements to its
machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL
SERIAL NUMBER
PART NUMBER
DATE PURCHASED

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWER SPOTTER 4 and is the answer not in the manual?

Questions and answers

Summary of Contents for Triple S POWER SPOTTER 4

  • Page 1 The contents of this manual are based on the latest product This operator’s book has important information for the use information available at the time of publication. Triple S and safe operation of this machine. Read this book care- reserves the right to make changes or improvements to its fully before starting the machine.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS APPLIANCE! WARNING! To reduce the risk of fire, electric shock, or injury: Unplug from outlet when not in use and before servicing. Do not use outdoors. Protect the machine from rain. 3.
  • Page 3: Periodic Maintenance

    OPERATING INSTRUCTIONS WARNING! For the safe operation of this machine follow steps 2-4. Rinse recovery tank out with clean water. the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal DAILY OR REGULAR MAINTENANCE injury and/or damage to machine and property! Rinse solution and recovery tanks out after every use.
  • Page 4 POWER SPOTTER 4 FINAL ASSEMBLY...
  • Page 5 POWER SPOTTER 4 FINAL ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 202050 Clamp-1/2" Solution 252706 Decal-Clean Filter After Every Use 255112 Decal-Warning Non-Foaming 251313 Base Assembly-Complete 258679 Recovery Tank Assm-Complete 258628 Solution Tank Assm-Complete 980002 Washer-1/4 Split Lock 253310...
  • Page 6 POWER SPOTTER 4 RECOVERY TANK...
  • Page 7 POWER SPOTTER 4 RECOVERY TANK PARTS LIST ITEM PART NO. DESCRIPTION QTY. 258613 Recovery Tank, Black 962002 Screw-10-32x1/2 Oval 962344 Screw-8-32x1/2 FHP Zinc W401D Washer-#10 Flat SAE Zinc 253442 Gasket-Vac Motor 253441 Gasket-.125 Ensolite 255120 Latch w/Keeper 253301 Ball and Float Assm-Complete...
  • Page 8 POWER SPOTTER 4 SOLUTION TANK...
  • Page 9 POWER SPOTTER 4 SOLUTION TANK PARTS LIST ITEM PART NO. DESCRIPTION QTY. 258619 Solution Tank, Black 962063 Screw-8-32x3/8 PHP 980079 Washer-SS 1/2ID x 1-1/4OD 211310 Body-90 Jet w/Lock Nut S626P Strainer-3/8NPT SLS 253345 Fitting-Barb 3/8 x 1/4 255120 Latch w/Keeper...
  • Page 10 POWER SPOTTER 4 FLOAT ASSEMBLY...
  • Page 11 POWER SPOTTER 4 FLOAT ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 259002 Tube-Vac Stack 252411 Cup-Float Ball 253439 Gasket-.125 Ensolite 253801 Grommet-Float Shut Off 252406 Cap-Ball Float Cup 251308 Ball-Float Shut Off 253301 Ball and Float Assm-Complete...
  • Page 12 POWER SPOTTER 4 VACUUM ASSEMBLY...
  • Page 13 POWER SPOTTER 4 VACUUM ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 962228 Screw-10 x 1/2 SMS 253442 Gasket-Vac Motor S948P Terminal-Female 911553 Terminal-Ring, Blue 255207 Motor-Vac-115V 3738 Motor-Vac-220V 911544 Wire-14 Gauge 253302 Filter Screen...
  • Page 14 POWER SPOTTER 4 BASE PLATE ASSEMBLY...
  • Page 15 POWER SPOTTER 4 BASE PLATE ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 908116 Cord-25' 18/3 962030 Screw-10-32 x 1/2 Type F PHP 920666 Nut-Hex 10-32 SS Nylock 980078 Washer-Flat 1/2OD x 1OD 920004 Nut-1/4-20 Hex 962003 Screw-10-32 x 3/4 PHP (2) 980079 Washer-SS &...
  • Page 16 POWER SPOTTER 4 HAND TOOL ASSEMBLY...
  • Page 17 POWER SPOTTER 4 HAND TOOL ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 911104 Tie-Cable 252008 Clamp-Oetiker 2-Ear 3/8 203359 Fitting-Hose Barb 3/8 203302 Quick Connect-Male 203308 Quick Connect-Female 253344 Fitting-Barb 3/16 x 1/4 254122 Hose-Vac 8' 254123 Hose-Solution 8' 258802 Hand Tool-4"...
  • Page 18 POWER SPOTTER 4 WIRING DIAGRAM...
  • Page 19 The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Triple S at the address listed herein for the location of the nearest Triple S repair center or agent or for other instructions pertaining to your warranty difficulty.