Triple S Q-LINE Series Operating & Maintenance Instructions

Triple S Q-LINE Series Operating & Maintenance Instructions

Advertisement

Quick Links

FLOOR MACHINES
Q-LINE SERIES
MODEL Q-1500
INTRODUCTION
This operator's book has important information for the
use and safe operation of this machine. Read this book
carefully before starting the machine. Keep this book
and tell all operators to read the book. If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.
For new books write to:
Triple S
2 Executive Park Drive
Billerica, MA 01862
Carefully inspect all components to ensure that there is
no concealed freight damage. If such damage is dis-
covered, file a "CONCEALED DAMAGE REPORT" im-
mediately with the delivering carrier.
OPERATING & MAINTENANCE

READ THIS BOOK

The contents of this manual are based on the latest
product information available at the time of publication.
Zep Inc. reserves the right to make changes or im-
provements to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER _________________________
DATE PURCHASED ____________________
INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Q-LINE Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Triple S Q-LINE Series

  • Page 1 FLOOR MACHINES Q-LINE SERIES MODEL Q-1500 OPERATING & MAINTENANCE INTRODUCTION INSTRUCTIONS READ THIS BOOK This operator’s book has important information for the The contents of this manual are based on the latest use and safe operation of this machine. Read this book product information available at the time of publication.
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1.
  • Page 3 OPERATING PROCEDURES WARNING! For the safe operation of this machine OPERATION follow the instructions given in this booklet and the training given by your supervisor. Failure to Set the machine upright onto the pad. Plug the do so can result in personal injury and/or damage machine’s power cable into a properly grounded outlet to machine and property! (see Safety Instructions).
  • Page 4 Q-1500 485904 - Pad Assembly, Flex Drive...
  • Page 5 Q-1500 PARTS LISTS ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 962002 Screw , 10-32 x 1/2 Oval 502396 Cover, Motor 504810 Interlock Assembly See Pg. 7 Motor, 1.5HP DC 962011 Screw , 10-32 x 1 3/4 Oval 502481 Collar, Upper Shaft 486407C...
  • Page 6 MOTOR PARTS LIST ITEM PART NO. DESCRIPTION QTY. 505286 Motor 115V, 1.5HP 505278 Motor 220V, 1.5HP 50C 502919 End Bell - Motor LOWER 500417 Armature Asm.w /Bearings,115V 500424 Armature Asm.w /Bearings, 220V 902012 Bearing, Motor Low er 503117 Field & Shell Assembly 902003 Bearing, Motor Top 500903...
  • Page 7 NOTES...
  • Page 8 The inoperative machine or warranted parts must be delivered to the authorized service center with shipping and delivery charges prepaid. If unable to locate a service center, you may contact Triple S at the address listed herein for the location of the nearest repair center or agent or for other instructions pertaining to your warranty difficulty.

This manual is also suitable for:

Q-1500

Table of Contents