Loading Dvd Or Vcd Discs; Playing A Dvd-Video Discs; Playing A Video Cd - Philips DVD962SA/001 Owner's Manual

Loading DVDs or VCDs
1
Press / OPEN/CLOSE on the front of the player to open
the disc tray.
2
Load your chosen disc in the tray, label side up. Make sure it
is properly inserted in the correct recess.
3
Gently push the tray, or press / OPEN/CLOSE, to close
the tray.
READ will appear in the status window and on the
player display and playback will start automatically.
Note:
– If 'Disc Lock' is set to ON and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc
must be authorized (see 'Access Control').
Playing a DVD-video disc
Playing a title
After inserting the disc and closing the tray, playback
starts automatically. The status window of the player display
shows the type of disc loaded, as well as the disc's
information and playing time.
The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate
numerical key 0-9; if not, use the 4/3, 1/2 (down/up/left/
right) keys to highlight your selection, then press OK.
The currently-playing title and chapter number will be
displayed in the menu bar and the player display. The
elapsed playing time will be indicated in the status window
and on the player display.
At the beginning of each title, the number of front
channels and surround channels will be displayed (e.g. 3/2).
If a subwoofer channel is present this will also be displayed
(+1).
If the audio format (MPEG, Dolby Digital, etc.) of a title
changes during play, this will be indicated on the display.
¶ If required, you can use the SOUND MODE key to select
Stereo, Dolby Surround-compatible, 3D-Sound or Multi-
channel reproduction. Play may stop at the end of the Title;
this can result in returning to menu.
¶ To stop playback, press 9 STOP.
The default screen will appear, giving information about
the current status.
¶ You can resume playback from the point at which you
stopped playback. Press B PLAY; when you see the .
RESUME on the screen, press B PLAY again.
The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RESUME on the remote control.
Or, press B PLAY when you see the . RESUME on the
screen, then press B PLAY again.
Notes:
– Since it is usual for DVD movies to be released at different
times in different regions of the world, all players have region
codes and discs may have an optional region code.
– If you load a disc with a different region code than your
player, you will see the region code notice on the screen.
– The disc will not play, and should be unloaded.

Playing a video CD

Playing a disc
After inserting the disc and closing the tray, playback
starts automatically. The status window of the player display
shows the type of disc loaded, as well as the disc's
information and playing time.
The disc may invite you to select an item from the menu.
If the selections are numbered, press the appropriate
numeric key 0-9.
The track number currently playing will be displayed in
the menu bar and the player display. The elapsed playing
time will be indicated in the status window and the player
display.
¶ If required, you can use the SOUND MODE key to select
Stereo, Dolby Surround-compatible or 3D-Sound
reproduction.
¶ To stop playback, press 9 STOP.
The default screen will appear.
¶ You can resume playback from the point at which you
stopped playback. Press B PLAY; when you see the .
RESUME on the screen, press B PLAY again.
The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RESUME on the remote control.
Or, press B PLAY when you see the . RESUME on the
screen, then press B PLAY again.
O - V
PERATION IDEO
25