Preparation General Notes; Connecting To Audio Equipment - Analogue - Philips DVD962SA/001 Owner's Manual

Preparation
General Notes
¶ Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
¶ For some connections, settings for digital and/or analogue
output are required. These settings have to be made in the
'Personal Preferences' menu which is only accessible via
your TV screen. In these cases you will need to connect the
player to the TV as well.
¶ Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best
connections.
Caution:
– Do not connect the player's audio out jack to
the phono in jack of your audio system.
Connecting to audio
equipment - analog
Connecting to an amplifier/receiver
equipped with two channel analogue stereo
¶ Connect the audio Left and Right outputs for Front speaker
connection (1) to the corresponding sockets on your
amplifier, receiver or stereo system using the audio cable
supplied.
AMPLIFIER
SURROUND
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
L
R
SURROUND
MAINS COAXIAL OPTICAL
MULTICHANNEL AUDIO OUT
Important:
– For the best sound quality with playback of
audio CDs and stereo SACDs, always use the left
and right connector of the high-quality stereo/
Multi-channel audio output. The separate stereo
output is intended only for connection to video
equipment such as a TV set.
1
CENTER FRONT
L 1
R 2
SUB WF FRONT AUDIO P /C P /C
CVBS r r b b Y S-VIDEO TV OUT
OUT
VIDEO OUT
AMPLIFIER
SURROUND CENTER
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
L
R
SURROUND SUB WF
MAINS COAXIAL OPTICAL
MULTICHANNEL AUDIO OUT
Connecting to a Multi-channel Audio/
(Video) receiver with 6 connectors
The SACD player contains a multi-channel decoder. This
enables playback of SACDs recorded in Multi-channel. You
only need to select Multi-channel using the Sound Mode
key.
1
Connect the audio Left and Right outputs for Front speaker
connection (1) to the corresponding input sockets on your
receiver using the audio cable supplied.
2
Connect the audio Left and Right outputs for Surround
speaker connection (3) to the corresponding inputs on
your receiver using an optional audio cable.
3
Connect the audio outputs for Center speaker and
Subwoofer connection (2) to the corresponding inputs on
your receiver using an optional audio cable.
Note:
– If the subwoofer is equipped with its own amplifier, the
Subwoofer connection should be connected directly to the
subwoofer.
AMPLIFIER
3 2
SURROUND
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
L
R
SURROUND
MAINS COAXIAL OPTICAL
MULTICHANNEL AUDIO OUT
1
FRONT
L 1
R 2
FRONT AUDIO P /C P /C Y S-VIDEO
CVBS r r b b TV OUT
OUT
VIDEO OUT
1
CENTER FRONT
L 1 1
R
2 2
SUB WF FRONT
AUDIO CVBS P r /C r P b /C b Y S-VIDEO TV OUT
OUT VIDEO OUT
P
REPARATION
13