Table of Contents
Advertisement
Shuffle
¶ Press SHUFFLE during playback.
The playing order of the tracks is changed.
¶ To return to normal playback, press SHUFFLE again.
Repeat track/disc
¶ To repeat the current track, press REPEAT.
appears on the display.
REPEAT TRACK
¶ To repeat the entire disc, press REPEAT a second time.
appears on the display.
REPEAT
¶ To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat a specific portion of a track:
¶ Press REPEAT A-B at your chosen starting point.
- appears on the player display.
A
¶ Press REPEAT A-B again at your chosen end point.
-
appears on the display, and the sequence begins to
A
B
play repeatedly.
¶ To cancel the sequence and continue playback, press
REPEAT A-B.
Scan
Scanning plays the first 10 seconds of each track on the
disc.
¶ Press SCAN.
¶ To continue playback at your chosen track, press SCAN
again or press B PLAY.
FTS (Favourite Track
Selection) - Audio CD only
¶ The FTS Programme allows you to store your favourite
tracks for a particular disc in the player memory.
¶ Each FTS Programme can contain 20 tracks.
¶ Each time a FTS program is played it will be placed at top
of the list. When the list is full and a new program is added,
the last program on the list will be removed from the list.
¶ The selections can be called up and played at any time.
¶ FTS programming is not possible in Audio Direct mode.
O
- A
22
PERATION
UDIO
Storing a FTS program
1
Load a disc and stop playback.
CD
stop
stereo track ti m e total tracks
stop
fts On
Off
track 1 2 3 4 5 6 7 8
program
Clear all
2
Use 4 (down cursor) to go to the list of available tracks.
3
Use 1 and 2 (left/right cursor) to select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
4
Store each track by pressing OK.
The track numbers will be added to the list.
The number of tracks and the playing time of the
programme will be shown on the TV screen and the player
display.
When your FTS program is complete, press B PLAY to
start playing; the FTS program will be automatically
memorized.
¶ Press FTS or use the 1 2 (left/right cursor) to set FTS to
ON or OFF.
Erasing a track from a FTS-program
1
Use 4 (down cursor) to go to the list of selected tracks.
2
Use 1 and 2 (left/right cursor) to select the track number
you wish to erase. To go directly to any track, enter the
track number using the numeric keys 0-9.
3
Press OK.
The track number will be erased from the list of selected
tracks.
Erasing the complete program
¶ Use 4 (down cursor) to select CLEAR ALL and press OK.
The complete FTS Programme for the disc will be
erased.
Audio Disk Mode
8 10321
total time
Advertisement
Table of Contents
