Favorite Track Selection (Fts) Program - Philips DVDQ40 Owner's Manual
Philips dvd video player owner's manual
Hide thumbs
Also See for DVDQ40:
- Owner's manual (26 pages) ,
- Owner's manual (25 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Moving to another track
¶ Press S or T briefly during playback to go to the
next track or to return to the beginning of the current
track.
¶ Press S twice briefly to step back to the previous track.
¶ To go directly to any track, enter the track number using
the numerical keys (0-9).
Shuffle
¶ Press SHUFFLE during playback.
➜ The playing order of the tracks is
changed.
¶ To return to normal playback, press SHUFFLE again.
Repeat track/disc
¶ To repeat the current track, press REPEAT.
➜
appears on the DVD player display.
¶ To repeat the entire disc, press REPEAT a
second time.
➜
appears on the DVD player display.
¶ To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat a specific portion of a track:
¶ Press REPEAT A-B at your chosen starting
point.
➜
appears on the DVD player display.
¶ Press REPEAT A-B again at your chosen end point.
➜
appears on the DVD player display, and the
sequence begins to play repeatedly.
¶ To cancel the sequence and continue playback, press
REPEAT A-B.
Scan
Scanning plays the first 10 seconds of each
track on the disc.
¶ Press SCAN.
¶ To continue playback at your chosen track, press SCAN
again or press B.
O
PERATION
Favorite Track Selection (FTS)
Program
¶ The FTS Program allows you to store your favorite tracks
for a particular disc in the player memory.
¶ Each FTS Program can contain 20 tracks.
Storing an FTS Program
1
Load a disc and stop playback.
2
Use 4 to go to the list of available tracks.
3
Use 2 or 1 to select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
4
Store each track by pressing OK.
➜ The track numbers will be added to the list.
➜ The number of tracks and the playing time of the
program will be shown on the TV screen and the player
display.
When your FTS Program is complete, press B to start
playback or, press 3 to go back to Stop mode. In either
case, the FTS Program will be automatically memorized.
Switching FTS ON/OFF
1
Use 3 4 to select FTS.
2
Use 2 or 1 to select either ON or OFF.
Erasing a track from an FTS Program
1
Use 4 to go to the list of selected tracks.
2
Use 2 and 1 to select the track number you wish to erase.
3
Press OK.
➜ The track number will be erased from the list of selected
tracks.
Erasing the complete program
1
Use 4 to select CLEAR ALL, then press OK.
➜ The complete FTS Program for the disc will be erased.
Page 20
Advertisement
Table of Contents
