Pro-face GP2000H Series Installation Manual page 2

• Since the GP2000H unit's cable combines power and signal
wires, there is a possibility of excessive noise effecting the
unit's communication with the External Device/PLC. To reduce
the chance of this occurring, be sure to attach noise reduction
devices to the External Device/PLC.
• This cable is designed only for use with the GP2000H Series
operator interfaces. It cannot be used with any other Pro-face
units.
• If this cable is connected to Digital's GP2000H Series RS-422 Conversion
Adapter (separately sold), the Conversion Adapter's terminal block can be used
to connect a PLC or for other wiring (for external output or for power).
Conversion Adapter Model No.:GP2000H-AP422
- 2 -