Download Print this page
Pro-face GP3000H Installation Manual
Pro-face GP3000H Installation Manual

Pro-face GP3000H Installation Manual

Soft-type cable for gp2000h conversion adapter rs-232c/rs-422 (with connector)

Advertisement

Quick Links

GP3000H Soft-type Cable for
GP2000H Conversion Adapter
<RS-232C/RS-422 >
(with connector)
Installation Guide
Thank you for purchasing Pro-face's
GP3000H Soft-type Cable for GP2000H
Conversion Adapter <RS-232C/RS-422>
(with connector) (Hereafter referred to as
"this cable"). This cable is an optional cable
designed to connect the GP3000H series unit
(Hereafter referred to as the "GP3000H") and
the GP2000H series RS-232C or RS-422
Conversion Adapter (Hereafter referred to as
the "GP2000H Conversion Adapter").
This cable comes in two types of
communication methods, RS-232C or
RS-422, each of which is available in two
lengths of 3m and 10m.
(This installation guide is valid for the
common mode filter RSAL-2001W
manufactured by TDK-Lambda
Corporation.)
Safety Precautions
• Be sure to confirm that power is not
being supplied to the GP3000H and
the external devices before connecting
this cable. Failure to do so can result in
an electric shock.
• Do not modify this cable, since it may
result in a fire or electric shock.
• This cable is not appropriate for use
with aircraft control devices, aerospace
equipment, central trunk data
transmission (communication) devices,
nuclear power control devices, or
medical life support equipment, due to
these devices inherent requirements of
extremely high levels of safety and
reliability.
• When using this cable with
transportation vehicles (trains, cars
and ships), disaster and crime
prevention devices, various types of
safety equipment, non-life support
related medical devices, etc. use
redundant and/or failsafe system
designs to ensure reliability and safety.
Package Contents
REV.A
(1) This Cable (1)
(2) Common Mode Filter (1)
- RSAL-2001W manufactured by TDK-
Lambda Corporation
(3) FG wire (1)
(4) Connector Cap (1)
(attached to the cable connector)
(5) Installation Guide (1) (This Guide)
This cable has been carefully packed, with
special attention to quality. However, should
you find anything damaged or missing, please
contact your local distributor immediately.
About the Manual
 About the GP3000H
• GP3000H Series Hardware Manual
• Maintenance/Troubleshooting
• GP-Pro EX Reference Manual "Hand
Held GP"
 How to connect the GP3000H to
peripheral equipment
• This Guide
• GP-Pro EX Device/PLC Connection
Manual "GP3000H Series Connection
Guide"
 About the GP2000H Conversion
Adapter
• GP2000H Series RS-232C Conversion
Adapter (GP2000H-AP232) Installation
Guide
• GP2000H Series RS-422 Conversion
Adapter (GP2000H-AP422) Installation
Guide
The manuals can be selected from the help
menu of GP-Pro EX or downloaded from
Pro-face Home Page.
URL
http://www.pro-face.com/otasuke/
1

Advertisement

loading

Summary of Contents for Pro-face GP3000H

  • Page 1 (3) FG wire (1) “this cable”). This cable is an optional cable (4) Connector Cap (1) designed to connect the GP3000H series unit (attached to the cable connector) (Hereafter referred to as the “GP3000H”) and (5) Installation Guide (1) (This Guide)
  • Page 2: System Design

    GP2000H-AP422 Mitsubishi PLC A, QnA, FX Series' 2 Port Adapter II GP070-MD11 *1 Some connections may not be possible depending on the type of PLC used. For details, please read the GP-Pro EX Device/PLC Connection Manual “GP3000H Series Connection Guide.”...
  • Page 3: Types Of Cables

    D-Sub connector. CBLSD422-10M <RS-422> (with connector) • This cable cannot be used when connecting the GP3000H to the GP3000H Conversion Adapter. Connecting and removing this cable • Dropping this cable’s connector or hitting it against hard objects could result in damage to the connector.
  • Page 4 2. Pull out the cable by holding the cable connector. (2) Insert the cable connector to the 1. Turn the lock ring to GP3000H cable connector until it clicks. unlock the connector. Match the  points and insert the cable connector, as shown below.
  • Page 5 Power Input 0 V Not connected Frame Ground (Common with SG) *1 When connecting to the GP3000H, signals cannot be output from the GP2000H Conversion Adapter. Do not make any connections to these pins. Please read the "Restrictions" (page 8) for details.
  • Page 6 • Input and Output signal lines must be separated from the power control cables for operational circuits. • The GP3000H’s power supply cord should not be bundled with or kept close to main  To avoid an electric shock, prior to circuit lines (high voltage, high current), or connecting the GP3000H’s power cord...
  • Page 7: Grounding Cautions

     Grounding Cautions  Input/Output Signal Line Cautions • Be sure to create an exclusive ground for • All GP3000H Input and Output signal lines must be separated from all operating the Power Cord’s FG terminal. Use a grounding resistance of 100 , a wire of circuit (power) cables.
  • Page 8 UL/c-UL Conversion Adapter and this cable to connect standards: the GP3000H to peripheral equipment. • GP3000H • The GP3000H cannot be connected to • This cable Ethernet networks. • GP2000H RS-232C/RS-422 Conversion • For GP3000Hs mounted with key...