Table of Contents
Advertisement
Quick Links
Read the instructions thoroughly before operating the tool and keep this manual for future reference!
OVERVIEW
INTENDED USE
Your rotary tiller has been designed for garden. Do not use for any other purpose. This tool is intended for domestic use
only.
Your charger has been designed for charging batteries of the type supplied with this tool. Do not use to charge other
batteries.
EXPLANATION OF SAFETY SYMBOLS
Danger due to materials blown out of
machine! Remove persons in the vicinity
from the danger are
Caution!
Risk of injuring feet!
SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and all instructions. Keep them carefully for future reference.
1)
Secure the work area
a) Keep work area clean and well lit.
b) Do not operate it in presence of flammable liquids, gases or dust.
c) Keep children and people surrounding you at a safe distance while you are using this tool.
Rechargeable Motor Hoe
Cat. No.: 27326
1.
2.
3.
4.
5.
6.
!
Lock-off button
On/off switch
Battery pack
Grip Area
lock Nut
Blade
To prevent falling objects
Do not expose the device to the damp
Do not put your hand into the device!
Wear ear and eye protection!
!
!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eurotops 27326
Summary of Contents for Eurotops 27326
- Page 1 Rechargeable Motor Hoe Cat. No.: 27326 Read the instructions thoroughly before operating the tool and keep this manual for future reference! OVERVIEW Lock-off button On/off switch Battery pack Grip Area lock Nut Blade INTENDED USE Your rotary tiller has been designed for garden. Do not use for any other purpose. This tool is intended for domestic use only.
- Page 2 Electrical safety a) Power tool plugs must match the outlet. Never modify the plug! b) Do not expose power tools to rain or wet conditions. c) Do not damage the power cord. Never force the cord for carrying, pulling or unplugging. d) When using the appliance outdoors, use a suitable extension cord.
- Page 3 3. Do not store in areas where temperatures exceed 104 ° F (40 ° C). 4. Load the tool at room temperature: 64 ° F-75 ° F (18 ° C-24 ° C) never to ambient temperatures below 40 ° F (4 ° C) and above 104 °...
- Page 4 OPERATION Setting the handle length and angle: （FIG C） 1， Turn the clamping bolt aligning the “UNLOCK” direction and extend upper part of handle to desired handle length. Then turn the clamping bolt aligning the “LOCK” direction and turn tightly. FIG C Setting the adjustable handle angle: （FIG D）...
- Page 5 (1). Connect the charger 7 to the charger station 8. (2). Plug the charger into an appropriate AC power outlet. The LED 9 lights green to tell you that the charger is ready for use. (3) Insert the charger station 8 into the battery pack 6, as shown in Fig F, making sure the charger station is fully seated in the battery pack.
- Page 6 Take them to a recycling center for used electrical and electronic devices. For more information you can consult your local government. Remove batteries first. Eurotops Versand GmbH Elisabeth-Selbert-Straße 3 40764 Langenfeld, Germany If technical support is needed, please call ...
Need help?
Do you have a question about the 27326 and is the answer not in the manual?
Questions and answers