Step 3: Setting Language Preference; Setting The Osd Language; Setting The Audio, Subtitle And Disc Menu Language - Philips DVP532K/FK User Manual

Getting Started
Step 3: Setting language
preference
You can select your own preferred
language settings.This DVD system will
automatically switch to the selected
language whenever you load a disc. If the
language selected is not available on the
disc, the disc's default language will be
used instead. The OSD language in the
system menu will remain once selected.

Setting the OSD Language

- - General Setup Page - -
Program
OSD Language
Screen Saver
Set OSD Language
1
Press SYSTEM MENU.
2
Press 1 2 to select 'General Setup' page.
3
Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu.
Move to 'OSD Language' and press 2.
4
Select a language and press OK.
To exit from the menu
Press SYSTEM MENU or select 'Exit
Setup Menu' and then press OK.
16
01-34 DVP532K_78
1
2
3
ENGLISH
4
5
6
1
2
3
4
16
Setting the Audio, Subtitle and Disc
menu language
- - Preference Page - -
Audio English
Subtitle Chinese
Disc Menu Japanese
Parental French
Password German
Default Spanish
Dutch
Italian
Set Preference To English
Press STOP twice then, press SYSTEM
MENU.
Press 1 2 to select 'Preference Page'.
Press 3 4 to highlight the following in the
Preference Page.
– 'Audio' (disc's soundtrack)
– 'Subtitle' (disc's subtitles)
– 'Disc Menu' (disc's menu)
Enter its submenu by pressing B.
Select a language and press OK.
3 5
Repeat steps ~ for other language
settings.
To exit from the menu
Press SYSTEM MENU or select 'Exit
Setup Menu' and then press OK.
If you choose OTHERS in Audio,
Subtitle or Disc Menu,
Press 3 4 to highlight 'Others'.
Press OK and when you are asked to
enter a language code (see 'Language
Code' on page 95).
Input a language code by using the
numeric keypad (0-9).
Press OK to confirm.
17/03/2004, 3:29 PM
8239 300 30432