LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. AVISO IMPORTANTE Philips Mexicana, S.A. de C.V. no se hace responsable por daños o desperfectos causados por: – Maltrato, descuido o mal uso, presencia de insectos o roedores (cucarachas, ratones etc.).
Page 3
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer.
Page 5
Index English --------------------------------------- 6 Español ------------------------------------ 35 8239 300 32131 01-34 DVP533K_78 19/03/2004, 2:55 PM...
Contents Introduction Supplied accessories ... 7 Care and safety information ... 7 Connections Connecting TV ... 8-9 Using Component Video jacks (Y Pb Pr) .. Using Composite Video jack (CVBS) ... Using S-Video jack ... Using an accessory RF modulator ... Connecting the power cord ...
Leave the player in the warm environment until the moisture evaporates. Do not block the vents – Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.
Component video input jacks (or labeled as Y Pb Pr or YUV) on the TV (cable not supplied). To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied).
RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator Use the composite video cable (yellow) to connect the DVD Player’s CVBS (VIDEO...
AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, “NO DISC” may appear on the display panel. NO DISC...
Connect the COAXIAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). Set the DVD Player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 25 “Digital Output”).
Functional Overview Front and Rear Panels STANDBY-ON B – To switch the DVD Player to Standby mode or ON Disc tray OPEN/CLOSE / – Open/Close the disc tray – For connecting microphone – Microphone volume control Mains (AC Power Cord) –...
MUTE – Disables or enables sound output 01-34 DVP533K_78 Functional Overview POWER B – To switch the DVD player to standby mode or ON 0-9 numerical key pad – Selects numbered items in a menu DISPLAY – Displays information on TV...
8-9 “Connecting TV”). Turn on the TV and set to the correct video-in channel. You should see the blue Philips DVD background screen on the Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.
This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match. - - Video Setup Page - -...
Getting Started Step 3: Setting language preference You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead.
“Setting up the TV”). Press STANDBY-ON on the DVD Player front panel. You should see the blue Philips DVD background screen on the TV. Press OPEN•CLOSE 0 button to open the disc tray and load in a disc, then press the same button again to close the disc tray.
Disc Operations Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load the disc. To select a playback feature or item Use the 1 2 3 4 or numeric keypad (0-9) on the Remote Control, then press PLAY B to start playback.
Zoom (DVD/VCD/CD Graphics/ JPEG) Zooming allows you to enlarge or reduce the video image during playback. Press ZOOM repeatedly to increase and decrease the playback video image. Press 1 2 3 4 to pan across the TV screen. Repeat (DVD/SVCD/VCD/CD/CD Graphics) Press REPEAT continuously to choose a Repeat mode during playback.
Disc Operations Time Search (DVD/VCD/CD Graphics) The Time Search function allows you to start playing at any chosen time on the disc. Press DISPLAY. Press 3 4 to highlight time search box. The on-screen display shows the total playing time of the title/chapter. Menu Menu TT Time...
Preview Function The preview function allows you to see the content of the Tracks (6 tracks shown on screen at any one time). Press PREVIEW. The preview menu appears on the TV screen. Select Digest Type: Select Digest Type: Select Digest Type: Select Digest Type: Title Digest Title Digest...
Disc Operations Repeat Press REPEAT continuously to access different ‘Play Mode’. SINGLE: play the selected file once, then return to the menu. REPEAT ONE: keep a JPEG image still on the screen or play an MP3 file repeatedly. REPEAT FOLDER: play all files in the selected folder repeatedly.
Video In channel. (See page 14 “Setting up the TV”). General Operation Connect a microphone (not supplied) to MIC on the side panel of the DVD player. PLAY/PAUSE Press KARAOKE repeatedly. ‘MIC ON/OFF’ appears on the TV screen.
Press OK to start playback. Helpful Hint: – Program can only be selected when a disc is inserted in the DVD player. Screen Saver This function is used to turn the screen saver on or off. - - General Setup Page - -...
If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.
The levels for dynamic selection: Full, 3/4, 1/2, 1/4 and Off. Helpful Hint: – DTS surround audio output are not available in this DVD player. 01-34 DVP533K_78 Equalizer The options included in Equalizer is: ‘Sound Mode’. Press the 34 keys to highlight an option.
Go To Video Setup Page 01-34 DVP533K_78 System Menu Options TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. Press 34 to highlight ‘TV Display’. Enter its submenu by pressing 2. Move the cursor by pressing 34 to highlight the selected item.
Off: Disable the current angle setting display. 01-34 DVP533K_78 Progressive This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks. Press 34 to highlight ‘Progressive’. Enter its submenu by pressing 2.
Smart Picture In this menu, you can choose a picture setting from a fixed set of predefined picture settings. Press 34 to highlight ‘Smart Picture’. Enter its submenu by pressing 2. Move the cursor by pressing 34 to highlight the selected item. Standard: select the standard picture setting.
System Menu Options Parental - cont’d Helpful Hint: – Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover. The rating level feature does not work for such Discs. Rating explanations 1 KID SAFE –...
TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE DA Converter 12 bit, 54mHz Component video Y: 1 Vpp into 75 ohm output (480i/p) PbPr: 0.7 Vpp into 75 ohm Video Output 1Vpp — 75 ohm S-Video Output Y: 1Vpp —...
– Connect DVD Player directly to the TV. – Make sure the disc is compatible with the DVD/ Player. – Ensure that the DVD Player’s TV Type is set to match that of the Disc and your TV. – Adjust the volume.
Page 33
– Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. – Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. – Press STOP twice before selecting System Menu.
Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs.