Mitsubishi Electric MSZ-HR25VF Operating Instructions Manual page 7

F
AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
Fan speed
to select fan speed. Each press changes
Press
fan speed in the following order:
(AUTO) (Low)
• Two short beeps are heard from the indoor unit when set to AUTO.
• Use higher fan speed to cool/heat the room quicker. It is recommended
to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
Note:
Multi system operation
When several indoor units are operated simultaneously by one outdoor unit for
heating operation, the temperature of the airfl ow may be low. In this case, it is
recommended to set the fan speed to AUTO.
(Med.) (High) (Super High)
Up-down Airflow direction
to select airfl ow direction. Each press
Press
changes airfl ow direction in the following order:
(AUTO) (1) (2)
(AUTO) .........The vane is set to the most effi cient airfl ow direction. COOL/
DRY/FAN: horizontal position. HEAT: position (4).
(Manual) .......For efficient air conditioning, select the upper position for
COOL/DRY, and the lower position for HEAT. If the lower
position is selected during COOL/DRY, the vane automatically
moves to the upward position after 0.5 to 1 hour to prevent
any condensation from dripping.
(Swing) .........The vane moves up and down intermittently.
• Two short beeps are heard from the indoor unit when set to AUTO.
Left-right Airflow direction
■
To change the horizontal airfl ow direction.
Move the vertical vane manually before starting operation.
Note:
If the vertical vanes are adjusted while the unit is not operating, be sure to return
the horizontal vanes to the original closed position.
(3) (4) (5) (SWING)
EN-6
EN