Figure 7: Id Label Of The Battery Module (Example) - Varta element Series Add-On Instructions


Plug in the connection (jumper) on the back of the battery
charger at the right (into the upper socket).

Plug in the cable (from the inverter, coming from above)
into the lower socket of the battery charger at the right.

Push in both battery chargers all the way until they snap
into place.
Make sure that the cables are not pinched.
Installing the battery module

Remove the ID label (Figure 7) affixed to the top of the
battery module.

Place the battery module into the storage unit enclosure as
shown in Figure 4: .

Figure 7: ID label of the battery module (example)

Subject to modification! Updated 06/2017 127