Preparations For Adding On; Preparation Of Assembly - Varta element Series Add-On Instructions

5.1

Preparations for adding on

Use your personal protective equipment.
This reduces the risk of injuries during the mechanical work.
Observe the safety rules!

Disconnect.

Lockout.

Check for absence of voltage.

Before connecting up the power supply, make sure
that no persons are in the hazard zone.
5.2

Preparation of assembly

Make sure that the floor has adequate load-bearing capacity.
Weight of the energy storage unit  Chapter 3.6 of the operating
instructions for the energy storage unit.

If necessary, have the static load-bearing capacity verified.
116
Subject to modification! Updated 06/2017