Setting The Wireless Parameters - Datafox TimeboyIV Manual

5.11.4.3. Setting the wireless parameters

Select the configuration and the
location for which you want to set the
wireless parameters.
The Ad-hoc-Mode you can use, if you
need connection directly to an PC.
You see here, if a key saved in the file
.df0.
This checkmark is necessary to
save power. As a result
increases the Battery running
time.
A scan (search) for APs is performed after a connection demolition after the set time. Note the
following Caution Box!
Caution:
A search for a new AP, requires a lot of energy and drain the battery. Avoid a permanent
search for an AP when the unit is operating in the border area. Select the interval be-
!
tween scans for new APs generous (80-120s).
At most there is the possibility that AP "Beacon Interval" setting. The higher this is set,
the less power required by the TimeboyIV. Recommendation: Beacon interval> 300ms
Manual TimeboyIV page 38 date: 11.07.2013 Version 04.02.04