Titan TA 250 Instruction Manual page 52

To change the strap width at the strap guide rear (28) please proceed as follows:
TA 250 = 16 mm position
and
TA 450 = 19 mm position
29
26
28
29
TA 250 / TA 450
(0001)
To set the respectively needed
strap width please unscrew the
pin strap guide rear (29) and the
threaded pin (26), following that
screw the components again to
meet the required strap width
adjustment.
(see figures on the left / right)
For the setting of the
respectively larger strap width
and before the screwing in
the components press the pin
strap guide rear (29) and the
threaded pin (26), the strap
guide rear (28) downward.
Then, you can screw the pin strap
guide at the back (29) as well as
the threaded pin (26).
(see figure on the left)
H TA 250 / 450 EU 38/15
TA 250 = 13 mm position
and
TA 450 = 16 mm position
26
29
of
26
29
52 / 112