Digital Output; Night Mode; Down Sampling - Philips DVP3126K/61 User Manual

DVD Menu Options

Digital Output

Select this if you connect to a multi-
channel decoder/receiver.
A
In 'Audio', press
Output }, then press
{ All }
Select this if the connected device has a
built-in multi-channel decoder that
supports one of the multi-channel audio
format (Dolby Digital, MPEG-2).
{ PCM }
Select this if the connected device is not
capable of decoding multi-channel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multi-channel signals
to PCM (Pulse Code Modulation).
{ Off }
To deactivate the digital audio output.
For example, if you use the FRONT (L/R)
AUDIO OUT sockets to connect to a TV
or stereo system.
B
Press to select a setting and press
OK to confi rm.
Helpful Hints:
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA fi les, the player
will output PCM signals.
34
(continued)
to select { Digital
.
A
B
A
B

Night Mode

This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
In 'Audio', press
Mode }, then press .
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
Press to select a setting and press
OK to confi rm.

Down Sampling

You can enable and disable the digital
signal for better sound output quality.
In 'Audio', press
Sampling }, then press
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Press to select a setting and press
OK to confi rm.
to select { Night
to select { Down
.