Step 4: Selecting The Matching Color System - Philips DVP3126K/61 User Manual

Getting Started
Step 4 : Selecting the
matching color system
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
Language Language Language
Aspect Ratio Aspect Ratio
View Mode
View Mode
Video Video Video
TV System TV System
Video Out
Video Out
Audio Audio Audio
Smart Picture Smart Picture
A
Press SETUP.
B
Press to select { Video }, then
press .
C
Press repeatedly to select { TV
System }, then press
D
Press to select one of the options
below:
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
18
(continued)
E
: : 4:3 4:3
F
: Auto Fit
: Auto Fit
: NTSC NTSC
: Component
PAL
: Personal Multi
A
.
B
Select a setting and press OK.
Follow the instructions show on the
TV to confi rm the selection (if any).
Changing NTSC to PAL
1.Ensure your TV supports
PAL Standard
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
Yes
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes
Press to highlight { Yes } and press
OK to confi rm.
To reset to default TV color system:
Wait for 15 seconds for the auto
recovery.
OR
Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
Press numeric keypad '3' on the
remote control.
The DVD background menu appears.
Helpful Hints:
– Before changing the current TV colour
setting, ensure that your TV supports the
'selected TV System'.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
NO
NO