Download Print this page

U-Line H-8041 Quick User Manual

Compact auto floor scrubber
Hide thumbs Also See for H-8041:

Advertisement

Quick Links

π
H-8041
COMPACT AUTO FLOOR SCRUBBER
QUICK USER'S GUIDE
NOTE: This guide is intended for quick reference
only, and does not replace the Use and
Maintenance Manual. Before using this machine,
read the Use and Maintenance Manual contained
in the machine packaging, and rigorously inspect
all the instructions.
1. Fill the detergent tank. (See Figure 1)
Figure 1
2. Adjust the slope of the handle by pulling the handle
release lever. (See Figure 2)
Figure 2
3. Lower the squeegee using the lever. (See Figure 3)
Figure 3
4. Open the detergent tank tap. (See Figure 4)
Figure 4
PAGE 1 OF 3
1-800-295-5510
uline.com
OPERATION
5. Press the On button. (See Figure 5)
Figure 5
6. Press the brush button to activate suction and water
delivery. (See Figure 6)
Figure 6
7. Operate the drive lever. (See Figure 7)
Figure 7
8. Begin working.
9. When you finish cleaning, proceed as follows:
• Press the brush button. (See Figure 8)
• Turn the machine off by pressing ON button for
at least four seconds.
• Raise the squeegee.
• Close the detergent tank tap.
• If necessary, charge the batteries.
Figure 8
0519 RH-8041

Advertisement

loading

Summary of Contents for U-Line H-8041

  • Page 1 π H-8041 1-800-295-5510 uline.com COMPACT AUTO FLOOR SCRUBBER QUICK USER'S GUIDE OPERATION 5. Press the On button. (See Figure 5) NOTE: This guide is intended for quick reference only, and does not replace the Use and Maintenance Manual. Before using this machine,...
  • Page 2: Daily Maintenance

    MAINTENANCE DAILY MAINTENANCE REPLACING THE SQUEEGEE BLADE 1. Empty the dirty water tank. (See Figure 9) • Release the clip. • Remove the two blade retainers by pushing them to Figure 9 the outside of the squeegee then extracting them. •...
  • Page 3 MAINTENANCE CONTINUED 4. Check the fuse to see if it is blown by looking in the 5. Install a new fuse, and reattach the fuse cover. fuse window. If the metal wire is present and not Replace tank back on and test. (See Figure 20) broken, the fuse is good.