Troubleshooting - Philips DVP3350K/55 User Manual

11 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
DVD player, check the following points before
requesting service. If the problem remains
unsolved, register your product and get support
at www.philips.com/welcome.
If you contact philips, you will be asked for the
model and serial number of your DVD player.
The model number and serial number are on
the back or bottom of your DVD player. Write
the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this DVD player do not work.
Disconnect this DVD player from the
power outlet for a few minutes, then
connect again.
Picture
No picture.
See TV manual for correct video input
channel selection. Change the TV channel
until you see the DVD screen.
36 EN
If this happens when you turn on the
progressive scan setting or change the TV
system setting, you have to switch to its
default mode:
1. Press to open the disc compartment.
2. Press the numeric button '1' (for
progressive scan) or the numeric
button '3' (for TV System).
Sound
No sound.
Ensure that the audio cables are connected
and the connected device is turned on to
the correct input source.
No sound during DivX movies play.
The audio codec may not be supported by
this DVD player.
Play
correct.
The aspect ratio of the screen is not aligned
with the TV display setting.
DivX subtitle are not displayed correctly.
Select the correct character set.
1. Press SETUP.
2. Select [ Preferences ]
Subtitle ] in the menu.
3. Select the character set that supports
the subtitle.
[ DivX