Find The Correct Viewing Channel; Select Menu Display Language; Turn On Progressive Scan - Philips DVP3360K/75 User Manual

2
Use the following buttons on the remote
control to navigate through the on-screen
menus.
Button Action
v V
Move up or down.
b B
Move left or right.
OK Confi rm a selection.
Enter numbers.

Find the correct viewing channel

Press 2 to turn on the DVD player.
1
2
Turn on the TV and switch to the correct
video-in channel.
• You may go to the lowest channel on the
TV, then press the Channel Down button on
the TV remote control until you see the
Video In channel.
° button repeatedly on the
• You may press
TV remote control.
• Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, etc..
Tip
•
See the TV user manual on how to select the correct
input on the TV.
•
If the audio output of this DVD player is routed to other
audio device (such as audio system or receiver), turn on
the audio device to the appropriate audio input channel.
Refer to the device user manual for details.

Select menu display language

Note
•
You can skip this setting if this DVD player is connected
to a HDMI CEC compliant TV. It switches automatically
to the same OSD menu language as per your TV setting.
1
Press SETUP.
[ General Setup ] menu is displayed.
Select [ OSD Language ], then press B.
2
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
• The language options are different
depending on your country or region. It
may not correspond to the illustration
shown here.
Press vV to select a language, then press OK.
3
Tip
•
You can set the default language for DVD audio and disc
menu, see chapter 'Adjust settings' -
for details.

Turn on Progressive Scan

Connect a progressive scan TV with component video
jacks (see chapter 'Connect video cables - Option 2:
Connect to component video jacks' for details).
1
Turn on the TV to the correct viewing channel
for this DVD player.
2
Press SETUP.
V
3
Press to select [ Video Setup ].
4
Select [ Progressive ] > [ On ], then press OK.
A warning message is displayed.
Video Setup
TV System
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Setup
5
To proceed, select [ OK ] and press OK.
The progressive setup is complete.
Auto (Eng)
English
Melayu
[ Preferences ]
On
Off
EN 9