Connect Power; Get Started; Prepare The Remote Control; Navigate The Menu - Philips DTP2130 User Manual

Connect power

Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The product is ready to be set up for use.

4 Get started

Prepare the remote control

1
Open the battery compartment.
2
Insert 2 AAA batteries with correct polarity
3
Close the battery compartment.
Note
If you are not going to use the remote control for a long
time, remove the batteries.
Do not use old and new or different types of batteries
in combination.
Batteries contain chemical substances, so they should be
disposed of properly.
1
When the on-screen menu is displayed, press
the buttons on the remote control to navigate.
Button
1 2 3 4
5 6 7 8
9 0
Move up or down
Move left or right
Enter numbers
1
Press to turn on this product.
2
Turn on the TV and switch to the correct
follow the instructions on the TV screen to install TV
and radio channels.
1
Press to turn on the product.
»
message is displayed.
2
Select [Yes] and press
3
Select [Country] and press
the country of your residence and press
4
Select and press
language and press
5
Select [Next] and press
»
Automatic channel search screen is
displayed, and the product begins to search
TV and radio channels.
»
When the search completes, the available
TV and radio channels are stored.
1
Press .
»
The home menu is displayed.
[DVD] - Select disc mode.
- Select TV mode.
- Select USB mode.
menu.
1
Press .
»
The home menu is displayed.
2
Select
>
press .
3
Press to select a language, then press
to proceed.
, then select
.
, then select a
.
to start to search.
- Select radio mode.
- Access the setup
>
> , then
.
9