7. Level 2 Repair
1) Attach Battery ,Front CAM, Sensor FPCB,
5
SUB PBA ,OCTA Connector
Screw 1 point in PBA
※ Caution
1) Be care of press power/time
`
7
Screw 16 Point and assemble SIM Tray.
* Torque value : 1.2 N·m
※ Caution
1) Be care of scratch and REAR damage
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
6
Assemble the REAR.
※ Caution
1) Be care of FPCB and Y-OCTA damage
8
Attach the finger sensor on the REAR and
Assemble the finger sensor on the PBA
※ Caution
1) Be care of scratch and REAR damage