Selecting The Destination Of A Route; Entering An Address; Selecting The Destination From The Poi; Selecting The Destination From Your Favourites - Fiat Spider 124 Owner's Handbook Manual

SELECTING THE DESTINATION OF
A ROUTE

Entering an address

To enter an address as the destination,
do as follows:
Select after selecting
MAP screen.
Select Find Address. By default, the
navigation system proposes the country
and town where you are. If needed,
select Country, enter the first few
letters of the country name on the
keyboard, and select one country from
the list of results.
If needed, select a new town: select
Town and Start entering the name of
the town on the keyboard. Find the
town you need: the most likely town
name is always shown in the input field.
To accept it, select . If the desired
name does not show up, the names
that match the string appear in a list
after entering a couple of characters (to
open the list of results before it appears
automatically, select
the town from the list).
Enter the street name: select
<Street Name> and start entering the
name of the town on the keyboard.
Find the street you need: the most likely
street name is always shown in the
input field. To accept it, select . If the
desired name does not show up, the
200
names that match the string appear in a
list after entering a couple of characters
(to open the list of results before it
appears automatically, select
select the street from the list).
Enter the house number: select
on the
House Number then enter the house
number on the keyboard (to enter
letters, select QWE). Select to finish
entering the address. (If the entered
house number cannot be found, the
midpoint of the street is selected as the
destination.
The selected location is shown on
the map. Navigation Start if is selected,
or after 10 seconds of no user
interaction. By touching the location
displayed on the screen, you can verify
the route. Additionally, the route can be
revised by selecting other options.
Selecting the destination from the
POI
(Point Of Interest)
If the name for a POI (Point Of Interest)
and select
is input, a search candidate list is
displayed.
Proceed as follows:
Select
MAP screen.
Select Find Places.
Select Filter by Name.
Using the keyboard, enter the name
of the POI (Point Of Interest). After
and
after selecting on the
entering a few letters, select to open
the list of POI with names containing
the entered character sequence.
The selected location is shown on
the map. The system transitions to the
next screen by selecting Navigate To,
or it returns to the previous screen by
selecting the < button. By touching the
location displayed on the screen, you
can change the destination to anywhere
on the map.
Selecting the destination from your
Favourites
Proceed as follows:
Select after selecting
MAP screen.
In the Navigation menu, select
Favourites. When Favourites is
selected, the screen transfers to the
Favourites screen. Select your
registered favourite.
The selected location is shown on
the map. The system transitions to the
next screen by selecting Navigate To,
or it returns to the previous screen by
selecting the < button. By touching the
location displayed on the screen, you
can change the destination to anywhere
on the map.
Navigation starts if Start is selected,
or after 10 seconds of no user
interaction. By touching the location
displayed on the screen, you can verify
on the