Fiat Spider 124 Owner's Handbook Manual page 199

NOTE Adjust the audio volume using
the portable audio device, commander
switch, or audio control switch. Audio
adjustments can also be made using
the portable audio device's volume
setting.
NOTE If the connection plug is pulled
out from the auxiliary jack while in AUX
mode, noise may occur.
NOTE This unit does not support a
USB 3.0 device. In addition, other
devices may not be supported
depending on the model or OS version.
USB devices formatted to FAT32 are
supported (USB devices formatted to
other formats such as NTFS are not
supported).
Bluetooth® HANDS FREE
Device pairing
To use Bluetooth ® audio and
Hands-Free, the device equipped with
Bluetooth ® has to be paired to the
unit using the following procedure. A
maximum of seven devices including
Bluetooth ® audio devices and
hands-free mobile phones can be
paired.
NOTE The Bluetooth ® system may
not operate for 1 or 2 minutes after the
ignition is switched to ACC or ON.
However, this does not indicate a
problem. If the Bluetooth ® system
does not connect automatically after
1 or 2 minutes have elapsed, make
sure that the Bluetooth ® setting on
the device is normal and attempt to
reconnect the Bluetooth ® device from
the vehicle side.
NOTE To consult the list of compatibles
mobile phones visit the
http://124spiderinfotainment.com
website.
Pairing procedure
Proceed as follows:
select the icon on the home
screen to display the "Settings" screen;
select the Devices tab;
select Bluetooth ® and turn the
Bluetooth ® setting on;
select Add New Device to display
the message and switch to the device
operation. Using your device, perform a
search for the Bluetooth ® device
(peripheral device);
select " 124 Spider" from the device
list searched by the device;
Device with Bluetooth ® version
2.0 input the displayed 4-digit pairing
code into the device. Device with
Bluetooth ® version 2.1 or higher make
sure the displayed 6-digit code on the
audio is also displayed on the device,
and touch the Yes. Connection
permission and phonebook access
permission for your mobile device may
be required depending on the mobile
device. If pairing is successful, the
functions of the device connected to
Bluetooth ® are displayed;
devices compatible with SMS
function SMS messages is downloaded
automatically. A download permission
operation for your device may be
required depending on the device.
After a device is registered, the system
automatically identifies the device.
Device selection
If several devices have been paired, the
Bluetooth ® unit links the device last
paired. If you would like to link a
different paired device, it is necessary to
change the link. The order of device
priority after the link has been changed
is maintained even when the ignition is
switched off.
Connecting other devices
Proceed as follows:
select the icon on the home
screen to display the "Settings" screen;
select the Devices tab then select
Bluetooth ®. Turn the Bluetooth ®
setting on and select the name of the
device you would like to connect;
Phone And Audio selection
connects both devices as hands-free
and Bluetooth ® audio. Phone Only
selection connects as a hands-free
device. Audio Only selection
connects as Bluetooth ® audio.
Making a call
Telephone calls can be made by saying
the contact name in the downloaded
197