Track Search; How To Use Ipod Mode; Device Pairing; Pairing Code Setting - Fiat Spider 124 Owner's Handbook Manual

button to switch to the USB mode and
start playback.

Track search

Press the track up button
skip forward to the beginning of the
next track.
Press the track down button
within a few seconds after
playback begins to track down to the
beginning of the previous track.
Press the track down button
a few seconds have elapsed to start
playback from the beginning of the
current track.

How to use iPod mode

An iPod may not be compatible
depending on the model or OS version.
In this case, an error message is
displayed.
NOTE The iPod functions on the iPod
cannot be operated while it is
connected to the unit because the unit
controls the iPod functions.
Track search
Press the track up button
skip forward to the beginning of the
next track.
Press the track down button
within a few seconds (depends
on iPod software version) after playback
begins to track down to the beginning
of the previous track.
Press the track down button
a few seconds (depends on iPod
once to
software version) have elapsed to start
playback from the beginning of the
current track.
Category search: press the category
down button 5 to select the previous
category and press the category up
button 6 to select the next category.
after
The types of categories include Playlist,
Artist, Album, Song, Podcast, Genre,
Composer, and Audio book.
List search: press the list down button
to select the previous list and press
the list up button
list. When the selected category is
Song or Audio book, there is no list.
Bluetooth® HANDS FREE

Device pairing

To use Bluetooth ® audio and
Hands-Free, the device equipped with
Bluetooth ® has to be paired to the
unit using the following procedure. A
maximum of seven devices including
once to
Bluetooth ® audio devices and
hands-free mobile phones can be
paired.
NOTE The Bluetooth ® system may
not operate for 1 or 2 minutes after the
ignition is switched to ACC or ON.
However, this does not indicate a
problem. If the Bluetooth ® system
does not connect automatically after
1 or 2 minutes have elapsed, make
after
sure that the Bluetooth ® setting on
the device is normal and attempt to
reconnect the Bluetooth ® device from
the vehicle side.

Pairing code setting

The 4-digit pairing code setting for
registration of your cell phone (pairing)
can be set beforehand. The initial
setting value is "0000".
Proceed as follows:
press the pick-up button or talk
button with a short press;
Say: [Beep] "Setup"
Prompt: "Select one of the following:
to select the next
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player."
Say: [Beep] "Pairing options"
Prompt: "Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code."
Say: [Beep] "Set pairing code"
Prompt: "Your current pairing code
is XXXX. Do you want to change it to a
different pairing code?"
Say: [Beep] "Yes"
Prompt: "Please say a 4-digit pairing
code."
Say: [Beep] "YYYY"
Prompt: "YYYY is this correct?"
191