Disposable Mixers; Mixer Jackets; Retaining Nuts; Replacement Nose Piece Restrictors - Graco 2K Ultra-Lite Series Instructions-Parts List Manual

Disposable Mixers

Size
3/16 ID .30 OD
1/4 ID 3/8 OD
3/8 ID 1/2 OD
1/2 ID 5/8 OD
Retaining Nuts (aluminum nut holds disposable mixer onto valve)
Description
Fits up to 3/8 O.D. mixers
Fits 1/2 O.D. mixer
Fits 5/8 O.D. mixer
Mixer Jackets (replace mixer retaining nuts)
Size
1/2 O.D. Fits 3/8 O.D.
5/8 O.D. Fits 1/2 O.D.
Fits 5/8 O.D. Mixer
Replacement Nose Piece Restrictors (for valves with 1:1 nose piece)
Size
1/8 I.D.
3/64 I.D.
551351 Short Throw Spacer
This spacer can be added under the air piston in the valve to limit how far the fluid needles push open. It reduces
the amount of material surge when the valve opens, and reduces the amount of snuff-back available. Used for dis-
pensing low flow small diameter beads.
551327 Nightcap
Plastic cap to cover nose piece outlet when valve is not in use. Disposable.
626407 Nose Piece with Flush Porting
Has 1/4 npt(f) flush port for non wide ratio valves.
626611 Ratio Check Outlet Adapter
Used with non wide ratio valves. Splits flow to collect in individual cups. Uses mixer retainer nut 512292.
28 309000
Accessories
Part No. (elem.)
551337 (16)
512012 (16)
512287 (18)
Part Number
512290
512291
512292
Jacket Fits Mixer
Part No. Part No.
512012
Part Number
626058
626059 uses o-ring 103154
Part No. (elem.) Part No. (elem.)
551338 (24) 551339 (32)
512013 (24) 512014 (32)
512016 (24) 512017 (30)
512288 (24) 512289 (30)
Jacket Fits Mixer
Part No. Part No.
512293 512295
512297 512288
Part No. (elem.)
551979 (36)
Jacket Fits Mixer
Part No. Part No.
512294 512014
512008 512017
512298 512289