NORTH STATES TODDLEROO 6182 Instructions

For helpful tips and instructions, please visit our website: www.northstatesind.com or contact our Customer Care department via
email: CustomerService@northstatesind.com l Phone (763) 486-1756 or Toll Free: (800) 848-8421
CAUTION: This product will not necessarily prevent all accidents and is only a deterrent. It is not a substitute for proper
adult supervision. Stop using when child becomes old enough to defeat it. Regularly check for wear and correct
positioning. DO NOT use product if damaged or broken. FOR INDOOR HOME USE ONLY.
WARNING: Adult installation required. Do not use this product to guard against toxic and dangerous substances or objects.
These dangerous items should always be kept "high-up" or placed in an area completely inaccessible to the child. Any
damage to the property during installation or removal of this product is the sole responsibility of the end user.
Installation
Step 1:
Determine install location,
front or side of cabinet /
drawer. Clean and dry inside
surface of drawer / cabinet.
Attach adhesive to both the
Step 2:
catch and tab latch. On the
catch, attach the adhesive to
the side with the hollow
rectangular cut out. On the tab
latch, attach adhesive to the
back flat side of the top
rectangular body.
Step 3: Remove the adhesive backing
and position the catch
approximately 1" from the
inside top edge of the drawer /
cabinet (Figure 1). Align the
tab latch to engage with the
catch (Figure 2). Once
properly positioned, secure
both the catch and tab latch
into place with the screws
provided (Figures 3 & 4).
Operation
To use: Open drawer / cabinet
slightly and press the tab latch
down in order for it to clear
the catch and fully open
(Figure 5). When closing the
drawer / cabinet, the tab latch
will engage automatically
(Figure 6).
To Disable: Press down on tab
latch until you hear it click
(Figure 7).
North States Industries, Inc. I 5455 Highway 169 N, Plymouth, MN 55442 I www.northstatesind.com
INSTRUCTIONS FOR DRAWER &
CABINET TAB LATCH 6182
Tools suggested: Phillips screwdriver and pencil (not provided).
Important: Please keep for further reference.
Parts included:
X10
X60
B
A
Front Installation
Install in the front of the
cupboards/ drawers
1 1
3
5
7
Distributed in the USA by
A. Screw
B. Catch
D
C. Tab Latch
D. Catch Adhesive
C
E. Tab Latch Adhesive
E
2
4
6
Made in China
Side Installation
Install at the side of the
drawers
1 2
3
4
5
6
7