Star SP500 Series User Manual page 9

Roll paper
Roll paper
Paper feeder
Paper exit
4 While observing the direction of the roll, set the
paper roll into the hollow as shown in figure.
5 Insert the edge of the paper into the paper feeder
(black plastic part). If inserted correctly, the edge
of the paper will pass through the paper exit.
6 Insert the top edge of the paper into the tear bar
slot, then mount the cover by reversing the pro-
cedure for opening the cover in step 1 above.
Note: When the paper end mark appears on the
paper, replace the roll paper before it runs
out.
Tear bar
E R E R
R O R O
R R
– 9 –
O N O N
F E F E
E D E D
F F
O F O F
P O P O
W E W E
R R