Connect A Usb Device; Connect A Network; Connect Power; Get Started - Philips BDP8000/12 User Manual

Connect a USB device

1
Connect a USB device to the
on the front panel of this player.
Note
•
Press , and select [browse USB] in the menu to access
the content and play the files.
•
Connect a USB device only to the
•
Philips does not guarantee compatibility with all USB
devices.

Connect a network

With a wired or wireless connection (see "Get
started" > "Set up a network"), you can connect
this player to:
• the Internet (for software update/BD
Live/Net TV service).
• or a home network (to access media files
from a DLNA media server, e.g. PC).
Note
•
Internet access to Philips website for software update
may not be allowed, depending on the router you use
or the Internet Service Provider's policy. Contact your
Internet Service Provider for more information.

Connect power

Caution
•
Risk of player damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the player.
1
Connect the AC power cable to:
• this player.
• the wall socket.
»
This player is ready to be set up for use.
14 EN
(USB) jack
jack on this player.

4 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.

Prepare the remote control

1
Press at the back of the remote control to
open the back cover.
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Replace the back cover.
Note
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not mix batteries (old and new or carbon and alkaline,
etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.

Find the TV input

1
Press to turn on this player.
2
Turn on the TV and switch to the video input
(refer to the TV user manual on how to select
the A/V input).
First time use
When you turn on this player for the first time or
this player is reset to the default setting, you are
prompted to select a menu display language and
then a country.