7 Additional Information
Update software
For software updates to enchance performance,
check the current software version of this player to
compare with the latest software (if available) at the
Philips website.
1
Press
.
2
Select [Setup], and press OK.
3
Select [Advanced] > [Version Info.], and
press OK.
Update software via network
1
Set up the internet connection (see "Get
started' > "Set up a network").
2
In the Home menu, select [Setup] >
[Advanced] > [Software Update] > [Network].
»
You are prompted to start upgrading
process if upgrade media is detected.
3
Follow the instructions on the TV screen to
confirm update operation.
»
When the software update is complete, the
player automatically turns off and on again.
Update software via USB
1
Go to www.philips.com/support to check if
the latest software version is available for this
player.
2
Download the software into a USB flash drive:
a Un-zip the download, and make sure that
the un-zipped folder is named "UPG_ALL".
b Put the "UPG_ALL" folder in the root
directory.
3
Insert the USB flash drive to the
jack on this player.
4
In the Home menu, select [Setup] >
[Advanced] > [Software Update] > [USB].
5
Follow the instructions on the TV screen to
confirm update operation.
»
When the software update is complete, the
player automatically turns off and on again.
Note
•
Do not turn off the power or remove the USB flash
drive when software updating is in progress to prevent
possible damage of this player.
Care
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
•
Specifications are subject to change without notice
Video
•
Signal system: PAL / NTSC
•
Composite video output: 1 Vp-p (75 ohm)
•
Component video output: 480/576i, 480/576p,
720p, 1080i
•
•
•
•
HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
Audio
•
2 Channel analog output
•
•
7.1 Channel analog output
•
•
•
•
•
(USB)
•
Digital output: 0.5 Vp-p (75 ohm)
•
•
HDMI output
USB
•
Compatibility: Hi-Speed USB (2.0)
•
Class support: UMS (USB Mass Storage Class)
Main unit
•
Power supply rating
•
•
Power consumption: 21 W
•
Power consumption in standby mode: < 0.18 W
•
Dimensions (w x h x d): 435 x 65 x 260 (mm)
•
Net Weight: 2.8 kg
Caution
Note
Y: 1 Vp-p (75 ohm)
Pb: 0.7 V-pp (75 ohm)
Pr: 0.7 V-pp (75 ohm)
Audio Front L + R : 2 Vrms (> 1 kohm)
Audio Front L + R : 2 Vrms (> 1 kohm)
Audio Surrond L + R : 2 Vrms (> 1 kohm)
Audio Center : 2 Vrms (> 1 kohm)
Audio Subwoofer : 1.15 Vrms (> 1 kohm)
Audio Rear L + R: 2 Vrms (> 1 kohm)
Optical, Coaxial
Europe: 220~240V ~AC, ~50 Hz
EN
29