Table of Contents
Advertisement
•
[Speaker Volume] - Set the volume level of
the speakes and the subwoofer to get the ideal
audio balance.
•
[Speaker Size]
•
Set the speaker size for the speakers and
the subwoofer.
•
Select
[Large] size for speakers that can
produce low frequency signal below
120 Hz.
•
Select
[Off] if there is no speaker
connected.
•
If the front speakers are set to
the subwoofer setting is [On] by default.
•
If the subwoofer is set to
speakers settings are [Large] by default.
Tip
•
The test tone is emitted from the speaker while adjusting
the volume level.
•
Allow 1ms setting for every 30cm distance between the
speaker and the listening position.
Network setup
1
Press
.
2
Select [Setup], and press OK.
3
Select [Network], and press
Network Installation
Video
View Network Settings
Audio
View Wireless Settings
Network
Net TV User Location
Clear Net TV Memory
EasyLink
Preference
Advanced
4
Select an option, and press OK.
5
Select a setting, and press OK.
•
To return to the previous menu, press
•
To exit the menu, press
[Network Installation]
Install the network connection.
[View Network Settings]
Display the information for the current network
status and the MAC address of this player.
[View Wireless Settings]
Display the information for the current Wi-Fi status.
[Net TV User Location]
Select the location of the Philips server which
provides Net TV services.
26
EN
[Small],
[Off], the front
.
.
.
[Clear Net TV Memory]
Clear the cookies, history, data you input for Net
TV which are stored in the cache area of the web
browser.
EasyLink setup
1
Press
.
2
Select [Setup], and press OK.
3
Select [EasyLink], and press
EasyLink
Video
One Touch Play
Audio
One Touch Standby
Network
EasyLink
Preference
Advanced
4
Select an option, and press OK.
5
Select a setting, and press OK.
•
To return to the previous menu, press
•
To exit the menu, press
[EasyLink]
This player supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
•
[On] - Turn on EasyLink features.
•
[Off] - Disable EasyLink features.
[One Touch Play]
When you press
(standby) to turn on this
player, the TV (if the TV supports one-touch play)
automatically turns on and switches to the video-in
channel. Disc play starts if there is a disc in this
player.
•
[On] - Turn on one-touch play feature.
•
[Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold (standby), all the
connected HDMI CEC devices (if the device
supports one-touch standby) switch to standby
mode simultaneously.
•
[On] - Turn on one-touch standby feature.
•
[Off] - Disable one-touch standby feature.
.
On
On
On
.
.
Advertisement
Table of Contents
