Route Audio To Other Devices - Philips BDP8000/12 User Manual

Tip
•
If the TV has a DVI connector only, connect via an
HDMI/DVI adaptor. Connect an audio cable for sound
output.
•
If there is a blank TV screen under HDMI connection,
on the remote control press
(numeric buttons) to recover picture display.
•
If this player connects to a TV compatible with 1080p
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
•
To play the digital video images of a BD-video or DVD-
video via an HDMI connection, it is necessary that both
this player and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection
system).
•
This connection provides the best picture quality.
Option 2: Connect to the component
video jacks
Y Pb Pr
1
Connect component video cables (not
supplied) to:
• the Y Pb/Cb Pr/Cr jacks on this player.
• the COMPONENT VIDEO input jacks
on the TV.
2
Connect audio cables (not supplied) to:
• the Audio LINE OUT -L/R jacks on this
player.
• the AUDIO input jacks on the TV.
Tip
•
The component video input jack on the TV might be
labeled as Y Pb Pr or YUV.
12 EN
and then press "731"
AUDIO IN
Option 3: Connect to the composite
video jack
VIDEO IN
1
Connect a composite video cable (not
supplied) to:
• the VIDEO jack on this player.
• the VIDEO input jack on the TV.
2
Connect audio cables (not supplied) to:
• the Audio LINE OUT- L/R jacks on this
player.
• the AUDIO input jacks on the TV.
Tip
•
The video input jack on the TV might be labeled as A/V IN,
VIDEO IN, COMPOSITE or BASEBAND.

Route audio to other devices

You can route the audio from this player to other
devices.
Connect to an HDMI-compliant AV
receiver/amplifier
AUDIO IN
HDMI IN