Troubleshooting - Klarstein Mr. Frost Series Manual

EN
20

TROUBLESHOOTING

PROBLEM
Symbol [ ] flashs.
Symbol [ ] display in
LCD display window.
Ice cubes stick together.
Ice making cycle is normal
but no ice is made.
POSSIBLE CAUSE
Lack of Water.
There is too much ice.
The ice cycle is too long.
Water temperature in inner
tank is too low.
Ambient temperature or
water temperature in inner
tank is too high.
Refrigerant in cooling
system leaks.
Pipe in the cooling system
is blocked.
SOLUTION
Stop the ice maker, fill
water, and press "ON/
OFF" button again to
restart the unit.
Remove ice from ice
basket.
Stop the ice maker,
and restart it when the
ice blocks melt. Select
the small size ice cube
selection.
Change the water in the
inner Tank. Temperature of
water is better set between
8-32 °C.
Please run the ice maker
below 32 °C and pour
colder water into tank.
Verify by a qualified
technician.
Verify by a qualified
technician.