Clock Display; Cleaning And Maintanance - Klarstein Mr. Frost Series Manual

CLOCK DISPLAY

This unit is supplied with CLOCK dipalying function. If the displayed time is not correct,
you can adjust it to the correct digit through the CLOCK and SELECT button.
First press the CLOCK button once, the digit meaning hour will
start to fl ash fi rst, then you can press SELECT button to change
it, each press will increase 1 hour. Press the CLOCK button
again, the digit meaning minute then will start to fl ash, and
also press the SELECT to change it.
Then press the CLOCK the third time to confi rm it, and now it
display the new correct clock. And during adjusting process,
after 5 seconds fl ashing, the digit will automaticall change to
always displaing, also means the new clock

CLEANING AND MAINTANANCE

• Take out the ice basket.
• Clean the interior with diluted detergent, warm water and a soft cloth.
• Then use the water to rinse the inside parts, and drain out the water by unplugging
the drain cap on the side.
• The outside of the ice maker should be cleaned regularly with a mild detergent
solution and warm water.
• Dry the interior and exterior with a soft cloth.
• When the machine is not in use for a long time, open water drained cap to drain
water completely from water reservoir.
Cleaning reminder
When the symbol fl ashs, means the unit need to be cleaned. And if you have
cleaned the unit, always press the TIMER button for more than 5 seconds, this symbol
will disappear from the LCD display window. And the cleaning timer will reset to Zero
and reaccount again.
EN
19