Nice MORX Installation Instructions Manual page 28

Table "C19" Programme output _ (Relay 1) in the BISTABLE mode
This procedure associates the BISTABLE function with output N°1 so that the output
can be alternatively activated or deactivated. Set the TIMER to 0 seconds to return
to the MOMENTARY mode.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table "C20" Programme output
This procedure associates the BISTABLE function with output N°2 (see table C19).
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table "C21" Programme outputs
This procedure associates the BISTABLE function with both output N°1 and
output N°2 (see table C19).
1. Enter the programming password
2. Press to confirm the password
3. Enter
4. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
(Relay 2) in the BISTABLE mode
and (Relays 1 and 2) in the BISTABLE mode
to select the operation
Example
GB
Example
Example
27