Nice MORX Installation Instructions Manual page 21

Table "C6" Change the programming password
This function changes the programming password, from the next programming function
on the password will be the one entered in steps 5 and 7.
The programming password can be changed whenever required.
1. Enter the current programming password
2. Press
3. Enter
4. Press
5. Enter the new programming password (always 7 digits)
6. Press
7. Enter the same programming password a second time
8. Press
N.B.: If the operation was successful 3 tones will be heard.
Table "C7" Cancel a combination valid only for output
This function cancels a combination valid for output N° 1.
If the combination was valid for the two outputs, it will remain valid just for output N°2.
1. Enter the programming password
2. Press
3. Enter
4. Press
5. Enter the combination to be cancelled
6. Press
7. Enter the combination to be cancelled a second time
8. Press
N.B.: If the operation was successful 3 tones will be heard
20
to confirm the password
to select the operation
to confirm
to confirm
to confirm
to confirm the password
to select the operation
to confirm
to confirm
to confirm
(Relay 1)
Example
0444444
0444444
Example
1234
1234