Troubleshooting - Progress PEM6000E User Manual

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the surface
cause no effect on how the appliance
operates.
To remove the dirt:
1. Use the cleaning powder or the clean-
ing pad.
2. Clean the appliance with a moist cloth
and some detergent.
3. Heat the hotplate to a low temperature
and let it to dry.
4. To keep the hotplates in good shape,
regularly rub in a sewing machine oil.
Polish off the oil with absorbent paper.

TROUBLESHOOTING

Problem
You cannot activate the appli-
ance or operate it.
Important! For stainless steel edges of the
hob use the cleaning agent for stainless
steel.
The stainless steel can become dirty if the
temperature is too high. Because of this do
not cook with the stone pots, earthenware
pans or cast iron plates. Do not use the alu-
minium foil to prevent damage to the top
during operation.
The Stainless steel parts wash with water,
and then dry with a soft cloth.
Possible cause
Problem with the house electri-
cal system.
The stainless steel edge of the plate
can change the colour as a result of
the high temperature.
Activate the appliance again
and set the heat setting in less
than 10 seconds.
Examine the fuse in the electri-
cal system of the house in the
fuse box. If the fuses blow
again and again, speak to
qualified electrician.
progress 13
Remedy