The Remote Control - Philips HDRW720/05 User Manual

Some TV channels send coded TV signals that can only be viewed
properly with a purchased or rented decoder. You can connect such a
decoder (descrambler) to your DVD recorder. The following function
automatically activates the connected decoder for the TV channel you
want to watch.
•) Switch on the TV, and if necessary, select the programme number
for the DVD recorder.
•) Switch on the DVD recorder.
1 Use the CHANNEL q
P
number buttons 0..9 on the remote control to select the TV
channel for which you want to use the decoder.
If necessary, use the TUNER
internal tuner.
2 Press the BROWSER HDD
A
MENU
button on the remote control.
P
The 'SYSTEM MENU' appears.
and CHANNEL r
S
buttons or the
0
button to switch to the
H
button and then the SYSTEM
3 Select '
' using B
4 Press C
M
to select '
5 Select the line '
C
M
.
P
A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
If the 'Time Shift Buffer' contains important recordings, save
them with the REC/OTR n
chapter 'The Time Shift Buffer'.
6 Select '
' with D K
If the message window was closed, confirm the line with
C M
again.
7 Select '
' using B
C
M
.
8 Select '
' using B
9 Select '
' with C M
.
To switch off the decoder use C
switched off).
0 Confirm with OK
L
.
A To end, press SYSTEM MENU
Your decoder has now been allocated to this TV channel.
O
.
'.
' using B
O
and confirm with
1
button first. Refer to the
L
and confirm with OK .
or A
O I
and confirm with
O or A I
.
M
to select '
A
.
' (Decoder