Network Profile; Time/ Date Settings - Hama DIT1010BT Operating Instructions Manual

• Press [ ] (1) to go to the system settings.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
• Confirm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Show settings" menu item.

16.2.5 Network profile

The tuner automatically saves all successful network
connections (profiles). This means that re-establishing
these connections (for example, after the tuner was
disconnected from the power supply) does not require you
to re-enter the network access information.
To remove network profiles individually, proceed as follows:
• Press [ ] (1) to go to the system settings.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
• Confirm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Remove network profiles" menu item.
• Select the relevant network profile and press [POWER/
VOLUME/ENTER/NAVIGATE] (9) to remove it.
• Confirm the prompt querying if you want to delete the
network profile with YES.
• A profile that is currently active, or that is in use, cannot
be deleted.
Note
• Before giving or selling the tuner to someone else, we
recommend performing a factory reset.
• This will completely and permanently delete all
network information and connections stored on the
device.

16.3 Time/ Date settings

To access the time settings, proceed as follows:
• Press [ ] (1) to go to the system settings.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Time and date" menu item.
• Confirm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Update settings" menu item.
Auto update
Update from Internet
Choose this option to set the time and date automatically
from the internet. Set the timezone of your current location
(Set timezone) and, if desired, turn on automatic
adjustment between summer time and winter time
(Daylight savings -> ON).
Update from DAB / FM
If automatic time and date adjustment is activated, the
device receives time and date information from the station
over the FM/DAB/DAB+ radio network. This is the best way
to ensure that the clock will run accurately and the alarm
will trigger at the correct time, even after power outages.
No update
The time and date (DD-MM-YYYY) must be set manually;
no automatic calibration takes place.
Time/ Date settings
Set the date (DD-MM-YYYY) and time (hh:mm) manually
using [POWER/VOLUME/ENTER/NAVIGATE] (9).
Format
Choose between 12 and 24 hours format.
23