Informations And Notes Before Getting Started; Getting Started - Hama DIT1010BT Operating Instructions Manual

Warning – Batteries
• When inserting batteries, note the correct polarity (+
and - markings) and insert the batteries accordingly.
Failure to do so could result in the batteries leaking or
exploding.
• Only use batteries (or rechargeable batteries) that
match the specified type.
• Before you insert the batteries, clean the battery
contacts and the polar contacts.
• Do not allow children to change batteries without
supervision.
• Do not mix old and new batteries, or batteries of
different types or from different manufacturers.
• Remove the batteries from products that are not being
used for an extended period (unless these are being
kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not burn batteries.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can contain toxic,
environmentally harmful heavy metals.
• Remove spent batteries from the product and dispose
of them without delay.
• Do not store, charge or use the device in extreme
temperatures.

4. Informations and notes before getting started

Note
A detailed description of the UNDOK app and all of its
functions can be found in our UNDOK guide at:
www.hama.com - > 00054895 - > Downloads
Note
• For best reception, ensure that the antenna is fully
extended and vertical.
• Try various different positions if necessary to get the
best reception.
Preparing the remote control for use
Open the cover on the battery compartment. This can
be found on the back of the remote control and can be
opened by sliding in the direction indicated.
The extent of delivery includes two AAA batteries which
must be inserted into the battery compartment for the
remote control to work. When inserting the batteries,
ensure that they are inserted with the correct polarity.
The relevant polarity (+ / -) is marked inside the battery
compartment.
Network connection/ Preparing the Internet
connection
You can integrate this tuner into a network. To receive
Internet radio, an Internet connection is required on this
the network.
WLAN connection (wireless network)
• Ensure the router is switched on, is functioning correctly
and that there is a connection to the Internet.
• Activate your router's WLAN function.
• To ensure the correct functioning of your WLAN
connection, follow your router's operating instructions.
• Then proceed as described under point 5, "Getting
started".
Note
Use only original accessories (or accessories approved by
Hama) to avoid damage to the product.

5. Getting started

Note - optimising reception
This product has an antenna connection for external
antennas with a coaxial connection. A suitable antenna
that allows DAB, DAB+ and FM reception is included in
the extent of delivery. Alternatively, you can use an active
or passive antenna to improve the reception or to adapt
it to your requirements.
Please note:
• Always pull the antenna out completely.
• We recommend you adjust the antenna vertically to
ensure optimal reception.
8