Sound Controls; Selecting Surround Sound; Selecting Digital Sound Effects; Adjusting The Bass/Treble Level - Philips LX710/01 User Manual

Sound Controls

IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 7).

Selecting surround sound

In DISC COAX or DISC OPTI mode
If receiving Dolby Digital EX and Dolby
Digital 5.1 audio signal, press
SURROUND button will cyclic through:
DOLBY EX ™ DOLBY D (Digital) ™
STEREO ™ VSS (Virtual Suround Sound)
If receiving Dolby Digital 2.0 and PCM
audio signal, press SURROUND button
will cyclic through:
DOLBY PLII MOVIE ™ DOLBY PLII
MUSIC ™ DOLBY PL (ProLogic) ™
STEREO ™ VSS (Virtual Surround
Sound)
If receiving DTS audio signal, press
SURROUND button will cyclic through:
DTS (Digital Theatre Systems) ™
STEREO ™ VSS (Virtual Suround Sound)
In TV, Tuner or AUX mode;
Press SURROUND button will cyclic
through:
DOLBY PLII MOVIE ™ DOLBY PLII
MUSIC ™ DOLBY PL (ProLogic) ™
STEREO ™ VSS (Virtual Surround
Sound)
Helpful Hints:
– The available Surround outputs include:
Dolby Digital EX, Dolby Digital, DTS (Digital
Theatre Systems) Surround, Dolby Pro Logic II
and Dolby Pro Logic.
– In VSS (Virtual Surround Sound) mode, the
surround channel is reproduced through two
front speakers.
– MOVIE and MUSIC are Dolby Pro Logic II
surround sound.
– The surround feature is not available in
DISC 7CH mode.
– The centre and rear speakers operate only
in multichannel surround mode.
16
001-021-LX710-22-Eng
– The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.

Selecting digital sound effects

Select a preset digital sound effects that
matches your disc's content or that
optimises the sound of the musical style
you are playing.
Press SOUND on the remote to select
the available sound effect.
In Dolby Digital EX, Dolby Digital, DTS,
PRO LOGIC or PRO LOGIC II (MOVIE)
surround mode, you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
In VSS, PRO LOGIC II (MUSIC) surround
mode or in Tuner mode, you can select :
JAZZ, ROCK, DIGITAL or CLASSIC.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
Adjusting the Bass/Treble
level
The BASS (low tone) and TREBLE (high
tone) features enable you to define the
sound-processor settings.
1
Press BASS or TREBLE.
2
Within two seconds, use the VOLUME
control to adjust the Bass or Treble level
(-10dB ~ 10dB, default setting - 0dB).
If the volume control is not used
within two seconds, it will resume its
normal volume control function.
If headphone is connected, it will
disable the bass/treble controls.
16 3/30/04, 1:50 PM
8239 300 30602