Connections; Step 1: Set Up The Speakers; Step 2: Placing The Speakers And Subwoofer - Philips LX710/01 User Manual

Connections

Step 1: Set up the speakers

OR
1
1
You can attach the speakers directly to
their bases if you want to place them on
a flat surface.
OR
2
You can choose to hang the speakers on
the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw (not
supplied) on the wall where the speaker is
to be hung and hook the speaker securely
onto the mounted screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
– The rear speakers are labelled as REAR C
(centre), REAR L (left) or REAR R (right).
– The front speakers are labelled as
FRONT L (left) or FRONT R (right).
6
001-021-LX710-22-Eng
2
Rear speaker
1
2
3
4
5
6
Step 2: Placing the speakers
and subwoofer
Front centre speaker
AV Receiver
2
2
Front Speaker
(Left)
1
4
Rear centre Subwoofer
3
speaker
(Left)
For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.
Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
Place the centre speaker above the TV or
the AV receiver so that the centre
channel's sound is localised.
Place the rear speakers at normal
listening ear level facing each other or
mounted on the wall.
Place the rear centre speaker behind the
listening position or mounted on the wall.
Place the subwoofer on the floor near
the TV.
Helpful Hints:
– To avoid magnetic interference, do not
position the front speakers too close to your TV.
– Allow adequate ventilation around the AV
receiver.
3/30/04, 1:47 PM
Front Speaker
(Right)
1
5
3
Rear speaker
(Right)
8239 300 30602