Table of Contents
Advertisement
Run the appliance care programme as
follows:
Prepare the appliance for appliance
1.
care. ~ Page 47
Set the programme to position 1.
2.
Press and hold ü Drying Aim . At
3.
the same time:
Set the programme to position 4.
4.
'˜‚ and the programme duration will
now alternate on the display.
Press N.
5.
'˜ƒ and the programme duration
now alternate in the display.
Pull out the condensation container
6.
horizontally and empty it.
Pour a bottle of the original
7.
appliance care product and
approx. 1 ^ litre of warm tap water
into the condensation container.
Hold the full condensation
Note:
container horizontally at all times so
that no liquid spills out.
Slide in the condensation container
8.
until it clicks into place.
Press Start/Reload .
9.
The appliance care programme will start
and an audible signal will sound.
After approx. three hours, the appliance
pauses the appliance care programme
and the remaining programme duration
flashes in the display.
Pull out the condensation container
10.
horizontally and empty it.
Appliance care
en
51
Advertisement
Table of Contents
