Cleaning and maintenance
en
You have now finished cleaning the
appliance's base unit.
Caution!
Material damage/damage to the
appliance
If you operate the appliance without a
fluff catcher (e.g. fluff filter, fluff depot,
depending on appliance specifications),
or if the fluff catcher is incomplete or
defective, this may result in damage to
the appliance.
Do not operate the appliance without a
fluff catcher, or with a fluff catcher that is
incomplete or defective.
Cleaning the moisture sensor
The moisture sensor measures
Note:
the amount of moisture in the laundry.
After long periods of usage, the
moisture sensor may become covered
by a fine layer of limescale or detergent
and care product residue. These
deposits must be removed regularly,
otherwise the drying results may not be
optimal.
Open the door.
1.
46
Clean the moisture sensor with a
2.
rough sponge.
Caution!
Risk of damaging the moisture sensor.
The moisture sensor is made from
stainless steel. Do not clean the sensor
with abrasive cleaning products or wire
wool.
Cleaning the filter in the
condensation container
The filter in the condensation
Note:
container cleans the condensation
water, which is used during the
appliance's automatic cleaning cycle.
Pull out the condensation container
1.
horizontally.
Pour out the condensation water.
2.