Table of Contents
Advertisement
Appliance settings
en
Basic settings
You can adjust certain basic settings on
the appliance. To make adjustments,
you first need to call up the setting
mode :
Set the programme to the
1.
( position.
Press ü Drying Aim and, at the
2.
same time:
Set the programme to the
3.
0 position.
Release ü Drying Aim.
4.
Setting mode is now activated.
30
The basic settings are assigned to the
following programme positions:
Position
Basic setting
Adjust the volume of the audible
0
notification signals (e.g. at the end
of a programme).
Adjust the volume of the audible
8
operating signals.
--------
Settings:
0
Off
1
Low
2
Medium
3
High
4
Very high
Adjust and activate/deactivate the
basic settings as follows
Position of the required basic
1.
setting.
Change the setting using:
2.
M N
Adjust any additional basic settings
3.
you require or save and exit the
basic settings.
Save and exit the basic settings as
follows
Switch off the appliance.
The selected settings are
Note:
retained even after the appliance has
been switched off.
Advertisement
Table of Contents
