Connecting Digital Hdmi Equipment; Connecting Video Equipment - Philips DFR9000/01 Instructions For Use Manual

Philips cineos digital av receiver system dfr9000 with video upscaling up to 1080i
Hide thumbs Also See for DFR9000/01:
Table of Contents

Advertisement

18
ENGLISH

4.6 Connecting digital HDMI equipment

SACD player
HDMI OUT
CD IN
CD-R IN
AUX IN
HDMI (High-Definition Multimedia Interface) provides the highest quality high-definition video
and multichannel audio. HDMI can carry both uncompressed high-definition video and
multichannel audio in all HD formats.Therefore just one single cable is needed for connecting
your DFR9000 to HDMI-enabled equipment.Your DFR9000 has one HDMI output for
connecting to an HDTV and two HDMI inputs for connecting to an HDMI-enabled SACD
player and another HDMI source device.
For HDMI connection an optional HDMI connection cable is required.
Notes:
HDMI connection can only be made to HDMI-equipped components with HDCP (High
Bandwidth Digital Content Protection). If you wish to connect to a DVI connector (equipped with
HDCP), you will need a separate adapter (DVI to HDMI) to do so. A DVI (with HDCP)
connection, however, does not support audio signals. Consult your local audio dealer for more
information.
If you are using an HDMI source device with HDCP as input to your DFR9000, the output
device (e.g. a TV) also has to be connected via HDMI (with HDCP).
No high definition audio data (SACD, DVD-Audio) via HDMI is supported!
Make sure the receiver is switched off and unplugged from the wall outlet before making
any connections.
Make sure a multichannel connection has been made. See '4.5 Connecting analogue
multichannel equipment'.
Connect the HDMI output socket of an HDMI-enabled SACD player to the HDMI IN 1
input socket (27) of your DFR9000.
Connect the HDMI output socket of an HDMI source device to the HDMI IN 2 input
socket (27) of your DFR9000.
Connect the HDMI input socket of an HDTV to the HDMI OUT output socket (27) of
your DFR9000.
Select 'SACD 2' in the 'A/V input' menu. See '5. System menu' and '10.7 'A/V input menu'.

4.7 Connecting video equipment

Your DFR9000 is equipped with RGBS (VIDEO 1 IN - 19 and VIDEO 2 IN - 20), S-Video
(VIDEO -21 - lower row) as well as CVBS (VIDEO - 21 - upper row) input/output sockets for
connecting video equipment.
For RGBS connection one 6-cinch to Scart cable is supplied.
Scart/RGBS connection
Note: DIGITAL IN 1 (28) and OPTICAL IN (23) are assigned as audio inputs for VIDEO 1 IN (19)
and VIDEO 2 IN (20). If the connected sources do not provide digital output, you should
reassign other (analogue) audio input sockets for audio connection to this specific device.
For this see '6.7 Reassigning input sockets' and '10.7 A/V Input menu'.
HDTV
HDMI IN
HDMI source
HDMI OUT
device

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfr9000 - annexe 1Cineos dfr9000

Table of Contents